Takom 8002 1/35 Scale, German Medium Tank Schürzen Armored Panzer III (Version M), Plastic Model kit (TK8002)

Schürzen III (Version M) Model Contents

• Plastic injection parts
• Decal
• Assembly guide
• Photo Etched

Schürzen III (Version M) Model Features

• It consists of plastic parts.
• Use a frame scissors to remove the parts.
• Use a model knife and sanding to clean the burr in the parts.
• Fill the gaps between the parts with filling material and sanding.
• There is no adhesive and paint in the box.
• You can make the necessary jerking with the assembly guide in it.
• It is recommended to paint it with the colors specified in the guide.

You can find the ingredients you need to finish this product at the bottom of the page

PZKPFW III (Panzerkampfwagen III) was a German middle tank from the Second World War. The first prototypes of the vehicle were built in 1936, mass production continued between 1937-1943 and ended with the production of approximately 5,800 vehicles. The tank in the E version was operated with a single Maybach HL 120 trm engine with a capacity of 300 HP. A 37 mm KWK 35/36 ball and two 7.92 mm mg 34 machine guns were equipped. placed in the tower.

PZKPFW III, II. During World War II, the German armored forces were "horsepower" and was one of the most intensely developed and modernized Wehrmacht tanks. The mass production started in 1936 and many varieties of this tank were produced. Chronologically the first version was equipped with a 37 mm ball and 230 HP engine. However, in December 1938, the first version E produced in large series was created. It had a new, significant more powerful engine, a completely new suspension and a stronger armor in the front of the tower and the body. Later (since December 1940), a stronger 50 mm ball was armed. In March 1940, the G version G, where the rear body and turret armor was strengthened, were started to be produced. Shortly after, in October 1940, the production of the H version, which was equipped with a 50 mm KWK 38 L / 42 ball from the beginning, was started. One of the most produced was the J version with a armor up to 50 mm thickness (then reinforced with applique plates) and was re-armed intensely after the experience gained from the clashes with T-34 and KW-1 tools. KWK 39 L / 60 ball. Cal. 50 mm. The latest development version was the support tank for armored grenades and the N version N version of the 75 mm KWK 37 l / 24 short -barreled ball. A large number of other vehicles, such as Stug III attack weapons, were built on the chassis of PZKPFW III. The PZKPFW III tanks, from the September 1939 to the French operation in 1940, to the Barbarossa and Typhoon operations in 1941, to the Kursk Battle in 1943 and the last operations of the Germans. It was used on almost all fronts of World War II. The USSR and the army against the Western Allies in 1944-1945.