Takom 2152 1/35 Scale, V-1 Flying Bomb Launcher, Plastic Model kit (TK2152)

V-1 Flying bomb launch ramp model contents

• Plastic injection parts
• Decal
• Assembly guide
• Photo Etched

V-1 flying bomb launch ramp model features

• It consists of plastic parts.
• Use a frame scissors to remove the parts.
• Use a model knife and sanding to clean the burr in the parts.
• Fill the gaps between the parts with filling material and sanding.
• There is no adhesive and paint in the box.
• You can make the necessary jerking with the assembly guide in it.
• It is recommended to paint it with the colors specified in the guide.

You can find the ingredients you need to finish this product at the bottom of the page

The manned version of the V1 missile Fieseler Fi 103R Reichenberg IV was designed for suicide attacks on allied planes and selected targets. The suicide flight program was planned to be implemented at the end of the war in 1945. Officially, German military officials used the term "multiplication", but the possibility of the pilot's removal of the rocket was not practically. It made it impossible for the high speed to be placed just below the jet motor input, but also to bend only 45 degrees, and this is impossible for the rocket to be reduced quickly. In the pilot cabin and parachute landing. A total of 70 pilots were trained and 175 Fieseler Fi 103R Reichenberg IV machines were produced, but their practical application in the battlefield could never be provided. The FiSeler Fi 103R Reichenberg IV missile itself was almost the same as the Japanese Yokosuka Mxy7 Okha, which was used by Japanese suicide pilots; The only difference was that the cockpit of the Japanese pilot was screwed and the missile prevented it from separation during the flight. Although the German missile was not possible in practice, it gave theoretically the chance to escape. Features: Length: 8 m, wing opening: 5,72 m, maximum speed: 800 km/h, maximum range: 330 km.