Takom 2078 1/35 Merkava 1 Israel Main Battle Tank model
Brand:Takom
Product Code:2078
Scale: 1/35 - 35 timesReduced model.
Type:Disassembled Kit (requires merge and painting)
Material:Plastic
Contents
3 Plastic Main Body
8 Piece Plastic Frames
1 transparent plastic frame
1 metal detail set
1 metal sheet
1 metal check rope
1 Mounting Guide
1 DEGAL
Merkava 1 Israel Main Battle Tank Model Features
Disasted plastic parts.
Use a frame scissors to remove the parts.
Use a model knife and sanding to clean the burr in the parts.
Fill the gaps between the parts with filling material and sanding.
There is no adhesive and paint in the box.
Use a special glass glue or PVA adhesive to paste transparent parts.
Use PVA or CA adhesive to paste the metal detail set.
You can make the necessary jerking with the assembly guide in it.
It is recommended to paint it with the colors specified in the guide.
You can find the ingredients you need to finish this product at the bottom of the page
About
The main battle tank produced by Israel for the defense forces of Israel. In 1970, studies were started for the construction of the tank, and in 1979, Israel was officially used.
The newest model of the tank consisting of four models is Merkava IV. Although it is not known how much they are produced, a total of 2,500-3,000 tanks are produced from four models. In Hebrew, his name means "warfare". The engine block of the tank is located on the front to protect against mine attacks. In this way, more armor was obtained for tanksavars. Excluding the tank engine (German -made MTU motor) is a very large proportion of Israel. Electric systems were used instead of hydraulic systems to prevent the spread of a fire that may occur in the tank. Since it is designed for the deserts of Israel, it is quite heavy to move from the air from one place to the air. Its weight is more than 70 tons. The independent shock absorber system provides a lot of speed and maneuverability advantage over the rugged terrain or on the deep pits compared to other tanks. There is no country other than Israel.
One of the most active weapons against tanks is the plastic anti -tank ammunition that reacts with a high -speed contact with the contamination of armor and makes heat up to 4000 ° degrees and makes the armor into liquid. These ammunitions pierce the armor with the high heat they create, but also eliminate the personnel by increasing the temperature of the habitat of the tank personnel to high levels. Merkava; It is the best tank to protect armor against plastic anti -tank ammunition, which can be used in such a type of missiles, rockets and so on. Israeli scientists reinforced ceramics to the ergiric of the metal where the armor of Merkava was built in a way that did not cause weakness and made the armor of Merkava resistant to high heat.
In addition, there are missile/rocket deflective systems called Trophy in Merkava. This system is designed to minimize the accuracy in the residential area. In Russian tanks, only the equivalent system is found.
Hobbytime Review
It is by far the best Merkava 1 model in the market. Similarity to the truth, satisfactory detail and new generation molding technology, it is especially recommended for experienced modelists with easy -to -join parts.