Mr.Hobby GT-70 Rivet Marking Knife with 0.25, 0.45, and 0.60 Micron Tips (MHGT70)

Contents

• 1 Piece Making Knife

Features

• Rivet Leave Effect: When you press the end of the end, it leaves a sharp and evenly round rivet head on the plastic surface. Light pressure is enough
• 3 End Option: 0.25mm / 0.45mm / 0.60mm in diameters of three different ends. These ends can be easily replaced with the alyan switch given together.
• Easy to recognize with end -length difference: Since each end is designed with different lengths (29–31mm), it offers quick recognition and ease of use
• Material & Weight: The body is a plastic-metal mixture, and the ends are hardened metal. Total weight is approximately 60g
• Application phases: end, not delete or cut; As it is suppressed, it creates round pits. It provides a manual effect independent of this machine
• Comprehensive Scale Compliance: 1/72 Models can leave small traces of the appropriate diameter to small, 1/48 and 1/32 scales. It may sound slightly big in 1/72
• Purpose of Use: Airplane, Tank, Armored Vehicles have been developed specifically to make realistic rivet details
• History: It is a product of the G-Tool series, which was released in 2010 and has been popular in the world of modeling for a long time.

Mr Perçin marking, aircraft, tank model, etc. It is a tool that mimics the rivets on it. When you press the main body, you can create sharp, smooth and round rivets without having to press hard. The end diameter is available in three dimensions: 0.25φ, 0.45φ and 0.60φ. It comes with three types of products and can be easily replaced with one switch. You can use it with a single tool, with kits of various scales.

Set content
● Perchin marking body
● 0.25φ end tool (length 29 mm)
● 0.45φ end tool (length 30 mm)
● 0.60φ end tool (length 31 mm)
● Key to replace end tools
* The lengths of the end tools have been changed to easily identify.

Attention
* Do not use in any product other than plastic products.
* Since the molding state will vary depending on the hardness of the plastic, try to rivet on the rail or behind the part to check the optimum pressing force before riveting.