Mr.Hobby C-064 10 ml. Yellow Green, Mr.Color Series Model Paint (MHC064)

Contents

• 1 Hobby Yellow Green Model Painting

Features

• Solvent -based (lakka): Mr. Color is a solvent (lacquer -based) paint. Thinner or Mr. It is used by thinning with Color Thinner.
• High pigment density: It provides excellent concealment even with very thin layers.
• Fast drying: When it comes into contact with air, it dries in a very short time, which provides fast operation.
• Durable surface: It creates a hard and durable paint film after drying.
• Compatible with Airbrush and brush: it can be used with both techniques, but with Airbrush, smoother results are obtained.
• Matte, semi -matte and bright options: offers a wide range of surface effects; Especially in modeling increases realism.
• Appropriate overlapping application: Detailed effects can be created with layer painting technique.
• Suitable for the professional level: It is especially preferred by experienced modelists and Diorama artists.
• Rich color range: It has special color scale for military, civilian, automobiles, aircraft and figure modeling.
• Compatible Product Series: Mr. Color Thinner, Leveling Thinner and Mr. It works compatible with auxiliary products such as retarder.

Mr. Color has a wide range of colors and can be used to paint many types of models, including character models, scale models (tanks, aircrafts and ships) and more. A wide variety of pigments and metallic particles can be used and most of them produce better colors than water -based paints (especially metallic and blue paints). (Especially from metallic and blue paints). Solvent -based paints dry quickly.
After drying, the paint film hardens and a beautiful, bright surface can be obtained.
The resin used gives a thick, fleshy feel and forms an optimum coating film.

Mr. When painting with Color, paint as much as necessary. You must thin with the Color thinning fluid.
Compared to water -based paints. Color's viscosity is higher. While painting with a brush, the paint is difficult to apply Add Color thinning fluid. (Approximate ratio: paint: thinning fluid = 1: maximum 1)
In addition, a few drops to reduce drying speed and brush staining Add retarder mild.
When applying paint with Airbrush, thus a maximum of 1: 2 according to the viscosity of the paint. When applying paint with Airbrush, apply only a thin layer of paint to the entire surface and apply it in fine floors in two or three layers.

Bright The brightness level for Color can be adjusted using C30 Flat Base. For a semi-bright surface, mix 5-10 %of the paint with Flat Base.
For a semi-bright surface, mix 5-10 %of the paint with Flat Base and 10-20 %for a matte surface with Flat Base. You can obtain different brightness levels by adjusting the Flat Base ratio.