Mistercraft S095 1/600 HMS (Sikht) Armored Ship Plastic Model Kit (MRCS095)

1/600 HMS (Sikht) Model Contents

• Plastic injection parts
• Decal
• Assembly guide.

1/600 HMS (Sikht) Model Features

• Disasted plastic parts.
• Use a frame scissors to remove the parts.
• Use a model knife and sanding to clean the burr in the parts.
• Fill the gaps between the parts with filling material and sanding.
• There is no adhesive and paint in the box.
• You can make the necessary jerking with the assembly guide in it.
• It is recommended to paint it with the colors specified in the guide.

You can find the ingredients you need to finish this product at the bottom of the page

HMS Sikh was a tribal class of the British Royal Navy. The ship was put into service in 1938 and during the Second World War, Bismarck sank and joined the Bon Cape War. In 1942, a commando raid, sipped by a combination of coastal artillery, aircraft weapons and air bombs. He aimed to resist the great destroyers built abroad and to increase the firepower of the existing muhrip fleets, and therefore, he was significantly larger and heavier than the previous I class. Ships were displaced 1,891 long tones (1,921 tons) at the standard load and 2,519 long tons (2,559 tons) at deep load. The total length of 377 fit (114.9 m), beam 36 fit 6 inches (11,13 m) and draft 11 fit 3 inch (3.43 m). Destructives were supported by two Parsons -toothed steam turbines, each of whom were a propeller shaft that uses a steam provided by three Admiraltry three drum boiler. The turbines developed a total of 44,000 miles of horsepower (33,000 kW) and accelerated maximum 36 knots (67 km/h; 41 mph). During the naval trials, the SİH was made 36.3 knots (67.2 km/h; 41.8 mph) from 44,428 SHP (33.130 kW) away from 2,015 long tons (2,047 t). The ships carried enough fuel to provide them with 5,700 nautical miles (10,600 km; 6,600 mi) in 15 knots (28 km/h; 17 mph). Although fleet leaders carried an extra 20 officers and men of the captain (D) and staff, the complement of the ships consisted of 190 officers and crews. The primary weapon of the tribal-class resuces was a 4.7-inch (120 mm) Mark XII ball called 'A', one pair of pairs on each head and ass on each head and ass, eight-fast firing (QF). 'B', 'x' and 'y' from front to back. The maximum height of the bonds was 40 °. For the defense of the anti -aircraft (AA), 40 millimeters (1.6 inches) QF carried a single quadruple nest for two -libral MK II "pompon" pistol and two quads nests for a 0.5 -inch (12.7 mm) Mark. III Machine Rifle. On the roof of the bridge feeding the data obtained by him and the 12 -fit (3.7 m) on the MK II Telemetre/Director on the stern of DCT, an analog mechanical computer, MK I Admiralty Fire Control time. The aircraft fire for the main weapons was checked by the Telemetre/Director who sent data to the mechanical detonation time. The ships were attached to a single -water upper assembly piece for the 21 -inch (533 mm) torpedo. It was not designed as anti -submarine ships, but even though the shooters were not mounted on all ships, they were provided with ASDIC, a depth charging shelf and two shooters for self -defense; Peace time allocation was twenty depth attack, but during the war, this number rose to 30.