Hobbywing 30402650 Ezrun 3660 G2 3200KV Sensor Brushless Engine
Brand:Hobbywing
Product Code:30402500
Type: Brush
Contents
1 xerun 3652sd engine
2 Sensor Cable (80mm / 120mm)
1 pinion gear
1 set factory class wires
Ezrun 3660 G2 3200KV Sensor Brushless EngineFeatures
Lipo: 2-3 S diameter: 35.8mm, shaft diameter: 5mm, shaft length 17mm weight: 214 grams.
IMPORTANT NOTE: "Maximum output power" is measured by 7.4V input voltage and ESC in Zero timing. This parameter is not neither "maximum input power" nor "rating power", "RPM X torque / 9550". Since each factory runs a different test platform, the above data may change.
► MAKS amps is a guide used to select the appropriate power system (esc, motor, gear ratio, etc.). If the actual input current of the power system is greater than the specified peak parameter, this means that the power system settings / configuration is above the peak (or in other words, "overloaded").
► "KV" is measured in the engine without load and zero timing. Do not operate the engine for a long time (1 minute), otherwise the engine may overheat.
Recommended Tools: 1/8 Mini Competition Tools
1/10 2WD / 4WD short road truck
1/10 Truggy / Monster Pro Race
It provides the best match with the XR8 SCT Pro ESC.
Hobbytime description
Roar approved, innovative 4-pole-8 magnetic "graded polar" rotor (hobbywing patented), low toothed effect and torque vibration improves the sense of control in the corners. While matching an HW sensor ESC (ie XR8 SCT / Plus), it can always work in "sensor" mode with its excellent output linearity after the engine identification. Turbo is allowed to activate the timing for higher output. It protects the magnetic ring motor from the signal initiative and guarantees the super balance in the "Sensor" mode. Mechanical timing can be adjusted to 40 degrees. The motor body without screws for routine care effectively extends the engine life and increases the engine efficiency. Hobbywing's quality engine will be the best choice for your vehicle.