Hobbywing 30102603 EzRun Series, MAX10 G2, 140 Ampere, Electronic Speed ​​Control for 2-4S Li-Po, Sensored, Brushless Motor (HBW30102603)

Contents

• 1 Hobbywing 30102603 Ezrun Series, Max10 G2, 140 amps, 2-4s Li-Po, Sensor, Electronic Speed ​​Control for Wrinkle Engine

Features

• Continuous current: 140a
• Explosion current: 880a
• Battery: 2-4s lipo
• Internal Bec: 6V/7.4V @ 5A (Switching mode)
• ESC Programming: Independent Programming Port
• Supported motor: Sensor and non -sensor brushless engine
• Motor Limit:
• 3s Lipo: KV <4000 3665 size engine
• 4S lipo: KV <2600 4268 size engine
• Application: 1/10 4x4 short track, truck, monster truck
• Cooling Fan: Works with Bec
• Size: 53x39.5x37.2mm (UXGXY)
• Weight: 120g (including wire weight)

This is Hobbywing Ezrun Max10 G2 140 amp sensor brushless waterproof ESC. This versatile ESC, which uses IP67 waterproof and a brush -free system with a smart sensor, is the perfect choice for 1/10 4x4 trucks and monster trucks. Matching this ESC with the Hobbywing 3665 G3 -dimensional engine offers a powerful combination ready to overcome the most challenging conditions.

Features:
Ezrun Max10 G2 ESC has an enhanced waterproofing cable interface and upgraded sensor mode to obtain a great sense of control and perfectly matches with Ezrun 3665 SD G3 engines.
The turbo supports the timing setting up to 32 degrees and with the maximum speed of maximum speed with the ezrun 3665 g3, it is 25 %higher.
Smart Start-Stop technology was introduced to Max10 G2 ESC. Frameless fan will not be activated to reduce noise and save power. The fan will only work when the temperature rises to a certain level.
Compared to the previous generation Max10 ESC, the total capacitor of the capacitor has been increased by 74 %and should protect against overheating. Functions improve power transmission to Akü to ESC to prevent overloading and causing capacitors from explosion.
Smart free wheel technology ensures that the Max10 G2 has higher driver efficiency than the previous generation, and as a result lower operating temperatures and a minimum temperature of about 25 ° C lower than the previous generation.
After connecting ESC to the OTA Bluetooth module, you can view data (gas quantity, voltage, current, temperature, speed, etc.) in real time to know the working status; The history of the working situation can also be displayed with data registration.