Futaba 05003172 10PX Car Remote, R404SBS Receiver, 2.4Ghz, F-4G,T-FHSS SR,T-FHSS,S-FHSS (FTK5003172)

Futaba 05003172 10px Car Control, R404SBS Receiver, 2.4GHz, F-4G, T-FHSS SR, T-FHSS, S-FHSS

Brand:Futaba
Stock Code:FTK5003172
Type:Control

Content

• 1 10px car control
• 1 buyer

Features

• The lightest and high balance design of its class
• High Speed ​​Response F-4G new system was established
• "Feeling" - new reaction adjustment function
• Supports up to 10 channels
• Lar -angle full -colored LCD adopted
• The menu symbol was adopted
• USB external output terminal can be used as a game control
• New Steering Unit / APA / APA Angler / Trigger adopted
• The mechanism of gas and steering spring was adopted
• NEW FIGURE MULTI -FOOD TEKTER ROWS
• The gear arm key + sub -switch + 3 -position switch was adopted
• Supports features for left hand -driven

You can find the ingredients you need to finish this product at the bottom of the page

Full color touch screen
The LCD T10px has a 4.3 -inch, full -colored, LCD touch screen from rear. Since the display has a transreflective feature, it provides visibility both inner and outdoors.

F-4G system and telemetry
The 10px is equipped with a F-4G system that allows telemetry to react faster than the T-FHSS SR system.

SR MODE (super reaction)
It is equipped with SR mode with a significant improved response feature compared to conventional systems. The SR servo is required to use SR mode.
10 channels can be operated up to 10 channels by using the S.BUS2 system together.

T-FHSS SYSTEM SYSTEM
You can use Kyosho Mini - Z Evo Special Receiver RA -42 by setting the system system from the buyer setting menu. The special receiver RA-42 must be purchased separately.

Updated software
The software can be updated via MicroSD card. Model data can also be saved on the MicroSD card. Telemetry log data can also be saved.

Model memory for 40 models
Model names can use up to 15 letters, numbers and symbols to use logical names. Using the model copying function, a model memory with different installations can be created.

Rowing Switch + Lower Switch + 3 Position Key
The shovel switch next to the steering wheel, the 3 -position switch with the holding site and the lower switch on the bottom are equipped to support multiple channels and function.

LIPE BATTERY BE USED
Optional LT2F2000B Lipo Battery can be used as a donor power supply. The working time was extended.

Brake mixing for large -scale cars
The braking of the front and rear wheels of 1/5GP and other large cars can be adjusted independently. Steering -mixing independent left and right steering servo adjustment is possible with proper bend turns.

Mixing 4WS for crawler vehicles and other 4WS types
This function can be used for tracked vehicles and other 4 -wheel drive vehicles. Double ESCs for pallet vehicles independently control the front and rear escs. The sensitivity of the gyroscope mixing futaba car speed can be adjusted via T10px. Tank mixing this function is directed to vehicles such as tanks. By using our CPS-1 channel power key, it can be matched by the switch and gas butterfly work by combining LED lighting and flash control.

S.BUS servo
This is a special function that allows you to set the parameters of our S.BUS servo which is changed using the PC link software.

Mc-Link
This is a special function that allows the adjustment of the content of the link software of the Futaba Speed ​​Controller (ESC), MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR etc. In T10px, variable frequency and other data changes can be made via PC.

Gas butterfly
Pressing a sudden trigger on a slippery road surface only causes the tires to rotate and the model cannot accelerate properly. By adjusting the gas butterfly speed function, the operation can be performed smooth and easily. It also suppresses battery consumption.

Steering speed
The steering wheel is very fast and so on. When you feel, the operating speed of the servo (the maximum speed suppressing) can be adjusted.

Non -telemetry led
It confirms that the telemetry function does not work when the telemetry function is closed.

Dial selection function
This function assigns functions to the dial (digital trim, holding dial, button). Number of steps and working direction can also be adjusted. Since all the dials are digital, there is no need to position trim in every model call.

Switch Selection Function
This function functions 10 switch. The operating direction can also be adjusted.

Wheel and trigger position can be changed
The wheel position can be offset by using the offset adapter of the accessory APA wheel position.
The wheel angle can also be adjusted.
The location of the gas trigger can be moved forward and back.
Left hand position is supported.

Rubber stalk
The rubber stalk can be changed by changing the narrow handle type.

Trim/dial locking functions
With the transmitter trim and dials, the locking functions that prevent adjustment and operating are provided.

Left hand support
The left and right assembly direction of the wheel section can be reversed.

Vibration feature placed in the holder
The vibration feature can be operated when the racing timer, tour navigation, when the time is full, in low battery and telemetry alarm. It sets this on each function screen.

USB port
You can use the donor as a game control by connecting it to the computer with a USB cable. (Some games cannot be used.)

About Futaba

Futaba Corporation was founded in 1948 as a manufacturer and seller of receiving vacuum tubes in Japan. Futaba, which uses vacuum tube technology, has started to produce vacuum fluorescent screens. In 1962, Futaba began to produce a press mold set components as well as radio control equipment and founded two of the primary sections of the company. This was followed by the development of mold basic components and the addition of VFD modules to complete the futaba's main product range. Our company's US -based branch Futaba Corporation of America (FCA) supports the same technologies and is the leading provider of electronic production services. (EMS) includes PCB devices to complete box construction, test and engineering design.