Futaba 05002701 R404SBS-E Remote Control Receiver, 2.4Ghz, F-4G SR,F-4G (FTR5102701)

Futaba 05002701 R404SBS-E control receiver, 2.4 GHz, F-4G SR, F-4G

Brand:Futaba
Stock Code:FTR5102701
Type:Buyer

Box content

• 1 R404SBS-E control buyer

Features

• Transmission type: F-4G
• Frequency range: 2.4 GHz
• Channels: 4 pwm / 10 s.bus
• Transmission Power: 100 MW EIRP
• S.BUS CONNECTION: S.BUS2
• Voltage range: 3,7-8,4 V
• Dimensions: 25.5 x 20 x 30.5 mm
• Weight: 7.2 g

You can find the ingredients you need to finish this product at the bottom of the page

Note: R404SBS-E receiver is designed to work only on electric models! The new F-4G (FUTABA 4th generation system) transmission mode supports the known SR mode and has a higher transmission rate than the previous T-FHSS SR. At the same time, the size of the new F-4G buyers R404SBS / R404SBS-E was reduced again.
To make this possible, the R404SBS-E has a large, up-facing antenna to optimize signal intake. Due to the selected design, the buyer's footprint remains unchanged. Futaba has a large number of FUTABA SV servos that can be converted to SR mode to fully benefit from the speed of F-4G SR technology. The following servos are currently Currently: BLS371SV, BLS471SV, BLS571SV, BLS671SV, BLS671SV, BLS373SV, S9372SV, S9373SV, HPS CB700, HPS CT700, HPS CB500, HPS CT500.
R404SBS-E has an antenna variety, and both antennas are located in the upgraded body section.
S.BUS2 sensors can be connected to the S.BUS2 port. They transmit telemetry data set up to 32. The buyer has an integrated telemetry transmitter that transmits the data to the donor. This allows the measured values ​​to be displayed in the transmitter or to give acoustically output.
Caution: The receiver supports HV (high voltage) and can be operated directly from the 2S lipo battery. Always be sure that connected servos are also designed for HV!