Dragon (Mono) MD002 1/35 Scale, Panzerkampfwagen II Ausf. F (Africa Corps) Plastic Model Kit (DGMD002)

Contents

• Plastic parts
• Decal
• Construction guide
• Photo Etching

Features

• The parts are produced by remaining faithful to one -to -one scale details of real tools and figures.
• Thanks to versatile molding technology, it offers more details with less parts.
• Due to the number of parts and detail levels, it usually appeals to all level models.

PZKPFW II (Panzerkampfwagen II) was a German light tank from the Second World War. The first prototypes of the vehicle were created in 1934 and mass production continued in 1935-1944 and ended with about 1,850 vehicles. The A Version A of the Tank was run with a single Maybach HL 57 TR engine with a capacity of 130 HP. It was equipped with 1 20 mm KWK 30 balls and 1 7.92 mm mg 34 machine guns placed in the tower.

The PZKPFW II was created by the German Arms Office as a result of a competition announced for a light tank equipped with a 20 mm ball of up to 10 tons. Daimler-Benz won the competition. Serial production started in 1935 and during this time many types of PZKPFW II tank were created. Chronologically, the first version was A, but it was produced in relatively small amounts. Shortly after, version B, which has a new, stronger engine and a modified chassis, was created. Already in 1937, a significant modified chassis and reinforced front body armor C version C version was created. At the end of 1940, the F version was created with a stronger armor and a better gearbox than version C. In 1942, a completely new chassis, the new 180 HP engine, and the significant maximum speed - 40 km / h to 60 km / h - with a significant maximum increased speed began. On the chassis of PZKPFW II, a large number of other vehicles such as Wespe Kundağı Motorituating Motorized or Marder II tank hunter were built. PZKPFWw II tanks, II. It was used on almost all fronts of World War II and they were appointed to secondary tasks since 1942.

Recommendations

• Use a frame scissors to remove the parts.
• Use a model knife and sanding to clean the burr in the parts.
• Fill the gaps between the parts with filling material and sanding.
• There is no adhesive and paint in the box.
• You can make the necessary jerking with the assembly guide in it.
• It is recommended to paint it with the colors specified in the guide.